Ultimate 3 Month Starter and Care Kit

1. Start with clean water that is less than 60 days old or purge with Clean & Drain and refill with clean water.
2. Add one bottle of Startup+ to your spa. Add a bottle every time you fill your spa.
3. Turn spa on and set filtration to a minimum of 8 hours/day (first 6 weeks).
4. Set heat to desired temperature.
5. Check pH and alkalinity and adjust if needed. (Add 1 capful of pH Up or pH Down (whichever is needed), wait one hour, then retest). Continue this process until the pH is balanced.
6. When spa is up to temperature, check pH and alkalinity again and adjust if needed. (Check frequently in the first month until the pH stays stabilized, then check once a week.)
7. Add one bottle of Waters Choice 12 oz. PURE ENZYMES for Spas. This is the enzyme that will do most of the work keeping your spa clean. Make sure to add another bottle every month thereafter!
8. Add Waters Choice Sanitizer. It is recommended 2 tsp every other use.
9. CLEAN filters (with filter cleaner and high pressure hose) once a week for the first 6 weeks! After that, clean every other week.
10. Use your new spa😊
11. Use Phosphate Remover as needed. To determine if you have phosphates, add one capful of water. If water reacts and has a cloudy white look, phosphates are present, add more phosphate remover. Signs of high phosphates are green water, or cloudy water can sometimes be due to phosphates.
12. Note: Most spas develop cloudy water during the first month. This is normal.
13. VERY IMPORTANT – Let the cloudy phase run its course. Add 2 tsp. Sanitizer every other time you use the hot tub.